Instead of fitting individual brick slips one-by-one, we’ve created a way of producing a pre-populated carrier. Integrating strong mesh within twelve bricks, application is now twelve times faster!
Mesh webbing is fused into the brick slip and can be used for application internally or externally.
Following extensive testing by Exova Warrington Fire, Monolith has been awarded an A1 Fire rating for our revolutionary BrickPlus: Pro brick slip product. This means that it is classified as 100% non-combustible, putting your mind at rest that the exterior of your building is as safe as it can be.
BrickPlus: Pro panels have been designed with the end-user in mind, with panels consisting of twelve slips, six in height and two in length – measuring in at 440mm in height x 553mm in width and 13mm in thickness.
A: Substrate (Varied)
B: Base Coat & Render Mesh Layer (3-6mm)
C: Top Coat Adhesive (3-6mm)
D: BrickPlus: Pro Panels (13mm)
Traditonally brick slip systems and brickwork alike requires a cavity meaning that the wall width is considerably wider than that of BrickPlus: Pro. The system has no cavity requirements and can be directly applied to insulation, external leaves and render boards alike, therefore reducing the build-up.
Our products are class leading interior and exterior systems that are at home in domestic and commercial buildings.
Traditonally brick slip systems and brickwork alike requires a cavity meaning that the wall width is considerably wider than that of BrickPlus: Pro..
